Menu navigation, Displaying the main menu, Note – Panasonic PT-AE1000 User Manual
Page 15: Main menu, Sub menu, Current, Operating guidance, Operating procedure, About the bar scale items, Default
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Menu Navigation
Menu
Navigation
The
menu
system
allows
you
to
access
functions
which
do
not
have
their
own
A
▼
^ ►
control.
The
menu options are structured and categorised. You can navigate through the menu with A v ^
buttons.
3
Press ◄ ► to adjust
or set the
seieaea iiem
- ,.enu item and press
ENTER
to a,
splay .h. Sub-menu.
The
Main
menu
has
5
options. Select me
requued
______
Displaying the Main menu
Press
MENU button
to display the
Main
menu
NOTE:
Some default settings
vary
by
the
selected input
signal,
(3 PICTURE
See -‘PICTURE Menu" on page 31,
Sub menu items
j Default setting
"“’"'’NORMAir*^
and the operating guidance.
Main menu
Sub menu
Current
settings
© POSITION
-0
LENS CONTROL
# LANGUAGE
OPTION
SELECT
RETURN
'ENTER
Operating guidance
Contains the required
buttons
to adjust the settings.
■ Operating procedure
1
. Press A ▼ to scroll to the required
Main menu
item
and press
ENTER to
select.
•
The selected item is highlighted in orange and
the
Sub-menu
is displayed on the right. See
“Main menu and Sub-menu” on page 29.
2. Press A ▼ to scroll to the required
Sub-menu
item and press ◄ ► or
ENTER
to adjust,
•
The selected item is called up and the other
menu
items disappear from the screen.
•
If
there
is a lower
level,
the next level will be
displayed.
'
..............
------ ----------
fa
PICTURE
^ I
..... ..... ■- "‘“‘”1
j
^
]
I
0
LtNbUUN iROL I
i
m
LANGUAGE
I
I
OPTION I
^RETURN
SELECT
enter
For items using a bar scale,
the
current
settings are
displayed
on the left of the bar
scale.
You can cycle through the options of an item
by pressing ◄ ►.
a
PICTURE
___ )
tN U 'H________
^ I
ì
F
o
TFÌ
on
'
J
SELECT'CS-
ì
C
ent
ER
DEFAULT
Press MENU or RETURN to return to the previous
menu.
• To continue projection,
press
the button
repeatedly
until
the
menu
disappears.
About the bar scale items
The triangle mark under the bar indicates factory
default
setting and
the square
indicates the current
setting.
Current
setting
Default
H Returning to the previous menu
%
Press the
MENU
or
RETURN
button to return
to
the previous menu.
Press
repeatedly to escape
the
menu mode and return to the projection.
Sub-menu items
DYNAMIC IRIS
WAVEFORM MONITOR
ADVANCED MENU
¡MEMORY SAVE
Default setting
MEMORY LOAD
jSIGNAL MODE*''
W* f# «• n..
COLOUR TEMPERAfURE"
*1. PC/COMPONENT/HDMI signals only
■ See “POSITION Menu” on page 34. ..... Sub-menu items Default setting V - POSITION 0 W - POSITION 0 DOT CLOCK‘D 0 CLOCK PHASE‘3 0 ASPECT 16:9*^ Sub-menu items wss OVERMAN k Ì yston Ì Default setting ON ‘1 VIDEO/S-VIDEO/COMPONENT signals only '2. PC signal only *3, COMPONENT/PC signals ^ *4. PC signal only *5. AUTO for NTSC signals ! only 0 LENS CONTROL See “LENS CONTROL Menu” on page 37, Sub-menu items ZOOM/FOCUS E nglish - 29 28 - E nglish