Adjusting the waveform, Adjusting the waveform in luminance, Full scan(y) – Panasonic PT-AE1000 User Manual

Page 13: Fullscan(r), Fullscan(b), Contrast r, Adjusting the wave form in green, Full scan, Single line scan, Brightness g

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Remote control operation

Remote control operation

—-------- You can monitor if the brightness and

contrast level of the input signal is in the

recommended range by displaying it in

waveform. See "WAVEFORM MONITOR"
on page 32.

1. Project a commercial adjusting signal.

Press

the

WAVEFORM

button to display the

waveform monitor.

3. Press

WAVEFORM

button to select the

required adjusting mode.

Press

A T

◄ ► to adjust the displaying

position of the waveform monitor.

Adjusting the waveform

Make sure to adjust to the 0% line first.

Adjusting the waveform in luminance

Display the

PICTURE

menu and adjust

BRIGHTNESS and

CONTRAST

with ^ ►.

OFF

FULL SCAN(Y)

FULLSCAN(R)

FULL SCAN(G)

FULLSCAN(B)

.Adjust the bottom line of the

BRIGHTNESS

^ waveform to 0 % (0 IRE).

Setting range: -32 to +32___________

|Adjust

the top

line

of the waveform

CONTRAST

to 100 % (100 IRE).

' Setting range: -32 to +32__________ _

Adjusting the

waveform

in red

Display the

ADVANCED

menu and adjust

BRIGHTNESS R

and

CONTRAST R

with ◄ ►.

You can adjust the more

detailed focus

LENSI

and

zoom of the projected image. Press

You can switch the preset picture mode

settings by pressing the

PIC. MODE

button. Press the button until the required

setting is selected. See "PICTURE MODE"

on page 31.

the

LENS

button to

display

the

LENS control

menu.

See "LENS CONTROL Menu" on page 37.

SINGLE LINE SCANfB]] BRIGHTNESS R

SINGLE LINE SCAN(G)

CONTRAST R

SINGLE LINE SCAN(R)

[Adjust the bottom line of the

[waveform to 0 % (0 IRE).

Setting range: -16 to +16

¡Adjust the top line of the waveform

to 100% (100 IRE).

Setting range: -16 to +16

SINGLE LINE SCAN(Y)

Adjusting the wave form in green

Display the

ADVANCED menu

and adjust

BRIGHTNESS G

and

CONTRAST G

with ◄ ►.

OFF

Deactivate the waveform
monitor.

FULL SCAN

SINGLE LINE SCAN

Monitoring the waveform of

brightness and contrast of the
whole image.

BRIGHTNESS G

CONTRAST G

Monitoring the

waveform

brightness and contrast in

each horizontal line of the

image. Press A V

select

the required line.

: Adjust the

bottom

line of the

' ■•■/aveform to 0 % (0 IRE).

: Setting

range:

-16 to +16

! Adjust the top line

of the

waveform

'to 100% (100 IRE).

I Setting range: -16 to +16

Adjusting the wave form in black

Display the

ADVANCED

menu and adjust

BRIGHTNESS B

and

CONTRAST

B with ◄ ►,

BRIGHTNESS В

CONTRAST В

Adjust the bottom line of

the

waveform

to 0 % (0 IRE).

Setting

range:

-16 to +16

You can display one of the

PICTURE

ADVANCED

menu items by pressing the

PICTURE ADJUSTMENT

button. Press

the button to switch between PICTURE

and

ADVANCED

menu.

Press A

▼ to

select the required menu item and ◄ ► to

adjust.

PICTURE menu items

PICTURE MODE, CONTRAST, BRIGHTNESS.
COLOUR, TINT, SHARPNESS, COLOUR
TEMPERATURE

and

DYNAMIC IRIS

You can switch off the

POWER

automatically by setting the

SLEEP

feature. Press the

SLEEP

button several

times to cycle through the duration of time.

See "SLEEP" on page 39.

Adjust the top line of the waveform

to 100% (100 IRE).
Setting range: -16 to +16

Adiust to 100%

0)
0)
0)

' Recommended

range

NOTE:

• SINGLE LINE SCAN

is monitoring the signal in

the required line and more detailed adjustment is

available than

FULL SCAN.

• When you adjust the

SINGLE LINE SCAN,

the

position of the waveform is depends on the

position of the selected line.

• When the

WAVEFORM

is displayed, the

COLOR

MANAGEMENT

is disables.

iMEMim

You can access saved settings instantly.

See "MEMORY LOAD" on page 33,

1.Select the required setting from

MEMORY1 - 5.

• Undefined setting will not be displayed.

2. Press

ENTER to

activate

the

selected setting.

f e t t o 0 % Monitor position

nglish

NORMAL

NATURAL

DYNAMIC

pWEMAI^

♦

VIDEO

CINEMA2

СГНЁМАЗ

ADVANCED menu items

GAMMA,

CONTRAST,

BRIGHTNESS, COLOR

MANAGEMENT, NR, MPEG NR, CINEMA
REALITY

and

TV-SYSTEM

NOTE:

• For each menu items

description,

see “PICTURE

Menu” on page 31.

• The screen will be cleared after 7 seconds without

any operation.

"OFF

MOMIN.

60MIN.

21ÒM1N.

90MIN.

ilOMIN.

Î2ÔMIN.

.4,.

150M1N.

NOTE:

• If you have not saved any settings,

MEMORY1

--------- *

■ • / —

are not displayed.

ENGLISH -