Audio mode for recording, Audio mode for piayback, Spatializer feature – Panasonic OMNIVISION VHS PV-7662 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

With the proper audio mode
setting, your VCR can:
1) record and playback an MTS stereo
broadcast (main language) in stereo
Hi-Fi.
2) record and playback a monaural
broadcast (main language) or
Secondary Audio Program (sub
language) on the Hi-Fi tracks for
better quality monaural sound.
3) playback non Hi-Fi tapes in monaural.
When recording, the selected broadcast
sound is always recorded on the left
and right Hi-Fi tracks as well as the
normal monaural track. This means
your tapes can be played back on Hi-Fi
as well as non-Hi-Fi VCRs.
Audio Mode for Recording
Hi-Fi
Push SAP/Hi-Fi repeatedly
(each push within 5
seconds) to select the
desired audio mode
(STEREO, SAP, or MONO).
Please refer to the “Receivable
Broadcast Types" section on page 28.
STEREO
SAP
MONO
The arrow indicates
your selection.
Do a recording.
See the “Record On a Tape” section on page 20.
Audio Mode for Piayback
Playback the tape.
See the “Playback a Tape" section on page 19.
Push SAP/Hi-Fi repeatedly
(each push within 5
seconds) to select the
desired audio mode
(HIFI or NORMAL).
Select “HIFi" to listen to your stereo
recordings with stereo sound, or
“NORMAL" for monaural sound.
The arrow indicates
your selection.
Spatializer Feature
This feature allows you enhance the stereo sound so that it seems to surround you.
Note: Your VCR needs to be hooked up to a stereo TV or stereo amp/receiver
with speakers (see page 28). For playback, tapes must be recorded in Hi-Fi
stereo. For TV viewing, programs must be broadcast in stereo.
Push MENU to
Q display the menu.
Push
AT
to select “SET
UP VCR,” and then push
► to display the “SET
UP VCR” screen.
................. .. MENU.............................
SET UP CHANNEL
Sa£CT :A T
KEY
SET > KEY
E№ :MENU KEY
^ Push
AT
to select
“SPATIALIZER,” and
° then push ► to select
“ON” or “OFF.”
.............. SET UP VCR ------------------
REPEAT PLAY
BEEPER
SPATIALIZER
ON
ON
ON
SELECT
:A T
KEY
SET > KEY
END :MENU KEY
■
■
o
■
o
■
-<
■
0
c
■
O
■
0)
■
3
■
O
1
o
o
Push MENU twice to return
to the normal screen.
Portions of this product manufactured under a licence from Desper Products,
Inc. SPATIALIZER, and the circle-in-square device are trademarks owned by
Desper Products. Inc.
When purchasing or renting prerecorded tapes, remember that only those recorded in Hi-Fi stereo will play back with
true stereo sound. Standard stereo tapes will play back with monaurfU sound.
In order to listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV or an
external stereo amp and speakers. (See page 28.)
When adjusting the tracking during playback, the Hi-Fi audio sound may revert to normal audio sound. This is normal.
There may be a difference in audio level between Hi-Fi and normal audio playback.
29