One minute skip, Shuttle variable speed search, Auto operation functions – Panasonic OMNIVISION VHS PV-7662 User Manual
Page 25: Auto repeat function
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

One Minute Skip
The VCR rapidly skips over one minute of tape.
Push ZERO/1 MIN
in Play mode.
The VCR will go into FF search mode and skip over 60 seconds
of recorded time. Normal playback will then resume.
Shuttle Variable Speed Search
The SHUTTLE Ring allows you to smoothly control the tape speed
during special effects playback in both forward or reverse.
Turn SHUTTLE Ring on the remote
control while in Plav or Still mode to
place the forward or reverse search.
• The more you turn the Ring, the faster the
search speed will be.
Push a function button such as: PLAY, STOP,
etc. on the VCR or remote control to release
the Shuttle mode.
• The VCR performs the function of the button pushed.
When the SHUTTLE Ring is turned more than half in Stop mode, [
normal Fast Forward or Rewind will begin.
Some noise bars are normal during Shuttle operation.
l
After 3 minutes in Still or Slow, the VCR will go into Stop mode. >
When the SHUTTLE Ring is released, the VCR goes into Still mode. |
Auto Operation Functions
Auto Playback
When a tape is inserted, the power turns on (Auto). If the record
tab* is removed, playback begins (Auto).
Auto Rewind
When a tape reaches its end during playback, fast forward or
manual record, the VCR will rewind and go into Stop mode.
Playback Auto Eject (Repeat Play is “OFF.”)
When a tape without a record tab* is played to its end, the VCR will
rewind and then eject the tape.
Memory Rewind Off
When the POWER button is pushed during rewind, the VCR will
turn off after rewind is complete.
* For record tab information, see page 5.
25