One time vcr setup (continued), Alternate instructions, Manual clock set – Panasonic OMNIVISION VHS PV-7662 User Manual
Page 16: Ubmaiba, One time, Setup, Continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

One Time
VCR
Setup
(continued)
Alternate Instructions
Complete the following steps if, any of the following
applies:
A You selected connection method
2
(VCR^CABLE/
DSS BOX^TV or VCR^TV ) in step 4 on page 14.
B
You selected “NO REMOTE” in step 6 on page 14
(your cable box or DSS receiver is not remote
controllable).
C You use a DSS receiver and selected “YES” in
step 8 on page 15.
D
Cable Box or DSS receiver could not be controlled
in step 8 on page 15.
Turn on the cable box and set
it to the local PBS channel.
• If you live near a different time
zone, make sure to set the
channel in your time zone.
• If you use a DSS receiver,
it must be turned off.
CHANNEL/CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX,TUNE IT TO YOUR
LOCAL PBS CH THEN. . .
PLEASE PUSH CH UP KEY
CH
ifl
Push CH
A
to start Channel
Auto Set and Auto Clock Set.
• The following messages appear.
“CH AUTO SET PROCEEDING"
“AUTO CLOCK SET PROCEEDING"
This screen appears to confirm
that auto clock set is completed.
Confirm that the
time is correct and
push CH
A
to exit
this screen.
If this screen appears,
auto clock set is not
available in your area.
Please set the clock
manually as described
at right.
7/25/1997 FRI 12:00PM
DST;ON
SETTING : CH02
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
AUTO CLOCK SET
IS INCOMPLETE
PUSH MENU TO SET CLOCK
If the displayed auto clock set time and
D.S.T. are not correct
If you live close to two different time zones, the VCR may
recognize the wrong PBS station as the setting channel.
If this happens, please complete the following steps.
1
Make a note of the SETTING: CH number shown on screen
and push CH
A
to exit.
2
Delete the setting channel form channel memory.
{See the Add or Delete a Channel section on page 17.)
3
Push MENU to display the menu.
4
Push
AT
to select “SET CLOCK," and then push ►
to display the “SET CLOCK” screen.
5
Push
AT
and ► to select and set “AUTO SET.”
6
Follow the One Time VCR Setup instructions on pages 14-16.
• If you use a cable box and have multiple PBS stations, tune the
cable box to a different PBS station and try auto clock set again
using the menu.
Manual Clock Set
(In case Auto Clock Set could
not be performed)
SET CLOCK...............
UBmaiBa
......
SELECT:A Y KEY
SET ;► KEY
END :MENU KEY___________
See page 5 for DST.
1
Push MENU to
display the SET
CLOCK screen.
2
Push
AT
and
4
►
to select and set
the month, date,
year, time, and
D.S.T. (Daylight
Saving Time).
To Make Corrections,
repeatedly push to move the cursor
to the incorrect entry and make the
correction.
3
Push MENU twice
to starUheclock
and exit this mode.
............. SET CLOCK ................
1/ 4/1997 SAT 12:00PM
DST:ON
SET :•< ► KEY
START :MBJU KEY
16