Panasonic SCAK75 - Manual (Page 29)

V0iyfng the sound quality wi^
the manual equalizer
I'»
I *
I "t
I
I t
I ■«
I ^
El
Press the SOUND EQ joystick to turn on the
equalizer.
The SOUND EQ lamp lights more brightly, and “FLAT” is
cleared.
Dial SOUND EQ to display “MANUAL”.
When it is turned clockwise, the settings are selected in the fol­
lowing sequence.
® HEAVY <—,
(2) CLEAR
@ SOFT
@ DISCO
® LIVE
(6) HALL
© MANUAL
® Al EQ
Operate the SOUND EQ joystick and set the
sound quality as desired.
® <------> direction; For selecting the range of the sound to be
adjusted
Characteristics of each sound range
Under 100 Hz: Super woofer range
Around 330 Hz: Bass to midrange
Around 1 kHz: Midrange
Around 3.3 kHz: Midrange to treble
Above 10 kHz: Treble
©It direction: For adjusting the level (7 steps)
When the level is in the center, the dot flashes more rapidly.
Repeat steps © and @ to set the desired sound quality.
The original display is restored on the display panel in about
5 seconds. When the manual equalizer is ON, all four Al EQ
lamps light.
The sound quality can be re-selected using SOUND EQ while
the lamp is alight.
To release the equalizer
Press the SOUND EQ joystick so that “FLAT” is displayed.
•The sound quality setting is stored automatically. It is recalled
when “MANUAL” is next selected.
•All recordings are performed at the flat setting even if an alterna­
tive sound qualify setting has been selected.
C
.0
1
&
2
h S
"O
c
3
0
Q
3
?r
TJ
z
3
o
w»
1-7