Dial sound eq to display “al eq, Varymg, Sauna qualify wim fhe acamtk imag& (all equalizer – Panasonic SCAK75 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

varymg

sauna qualify wim

fhe acamtk imag& (All equalizer

The Al equalizer uses the SOFT, SHARP, HEAVY and LIGHT
sound quality coordinates to achieve subtie sound quality settings
with ease.

Press the SOUND EQ joystick to turn on the

equalizer.

The SOUND EQ tamp lights more brightly, and '‘FLAT” is
cleared.

Dial SOUND EQ to display “Al EQ”.
When it is turned clockwise, the settings are selected in the fol-
fowing sequence.

® HEAVY

@ CLEAR

(3) SOFT
(D DISCO
® LIVE
® HALL
® MANUAL
® Al EQ

operate

the

SOUND

joystick

and

set

the

sound quality as desired.

® ^------ > direction: SOFT-SHARP setting
@ i t direction: LIGHT-HEAVY setting

Repeat steps ® and @ to set the desired sound quality.

The original display is restored on the display panel in about

5 seconds. Only one Al EQ lamp lights to give a rough indica
tion of the coordinate position.
The sound quality can be re-selected using SOUND EQ while
the lamp is alight.

To release the equalizer

Press SOUND EQ joystick so that “FLAT” is displayed.

•The sound quality setting is stored automatically. It is recalled

when “Al EQ” is next selected.

• All recordings are performed at the flat setting even if an alterna

tive sound quality setting has been selected.