Panasonic NV-HD620 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

O NTSC SELECT

Set according to the colour TV system,
NTSC P.B.; For TVs that can receive PAL

signals.
The output signal is the quasi-PAL

system.

4.43:

When receiving NTSC 4.43 signals.

For TVs that can receive NTSC
4.43 signals.

3.58:

When receiving NTSC 3.58 signals.

For TVs that can receive NTSC

3.58 signals.

O VIDEO IN (AV2)

Connects a video cable from a movie camera or
another unit.

Connects an audio cable from a movie camera or
another unit.

iD CVC (Crystal View Control) Indicator

This indicator is lit when the VCR is on.

Display

Selects the required programme position (TV station)

of the VCR.

For tracking adjustment and vertical locking
adjustment.

• For manual tracking adjustment

The N/ and /\ buttons are used to adjust the
tracking when, for example, noise bars on the

picture during normal playback are better removed
manually than by automatic digital tracking control.

To return to automatic digital tracking control, press

both buttons together.

• For slow tracking adjustment

When noise bars appear during still or slow
playback, switch over to slow playback and adjust
with the V or ^ button to reduce the noise bars,

• For vertical locking adjustment

Use the \/ and /N buttons to minimize any vertical

jitter during still picture playback.

Set VCR/TV switch to VCR for using V ^ of remote
controller.

(D REC/OTR

Starts recording.

For One-Touch Recording (OTR),

0 TIMER REC

Turns the timer recording function on and off.

[3 is lit or not lit.

Once you operate the timer recording function,
normal VCR operation is not possible unless you

press this button again and release the VCR from the

timer recording standby mode.

STOP

Stops playback or recording.
Ejects the video cassette.

0 PLAY

Starts playback.
“O” is lit.
For the repeat playback function.

REAR

€> VIDEO IN (AV1)

Connects a video cable from a movie camera or
another unit.

VIDEO OUT

Connects a video cable to a TV or another unit.

0 RFIN

Connects the externa! aerial.

0 CH ADJ. (NV-HD620A only)

Adjusts RF transmitting channel AU31-43.

@ AC IN-

Connects the main power supply.

0 AUDIO IN (AV1)

Connects an audio cable from a movie camera or
another unit.

AUDIO OUT
Connects an audio cable to a TV or another unit.

RFOFF/TEST SIGNAL (NV-HD620A only)

RF OFF: Set to this position when the VCR is

connected to the TV via the AudioA/ideo
cable.

TEST SIGNAL OFF:

Set to this position when the VCR is

connected to the TV via RF coaxial cable

only.

TEST SIGNAL ON:

Set to this position when tuning the TV into
the VCR. The test signal is transmitted on
channel AU37 initially.

RFOUT

Connects the aerial terminal on a TV.

0 Video Playback Channel Selector

(NV-HD620EA only)
Selects the video playback channel.

■

CD
Q)