beautypg.com

Other functions, Ntsc playback, Other automatic functions – Panasonic NV-HD620 User Manual

Page 33: Ntsc playback •other automatic functions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Other Functions

NTSC Playback

Tapes recorded in the NTSC system can be played back

with this VCR via a PAL system TV.

•Set NTSC SELECT according to the colour TV system

of the TV.
NTSC P.B.: For TVs that can receive PAL signals.
4.43:

For TVs that can receive NTSC 4.43
signals.

3.58;

For TVs that can receive NTSC 3.58
signals.

Note:
On some TVs, the playback picture may roll up or down;
adjust this using the V-HOLD control on the TV. TVs not
equipped with a V-HOLD control cannot correct this
condition. The playback picture may shrink vertically, and

black bars may appear both on the top and bottom of the
screen. This does not indicate a malfunction.
• During cue, review, still or slow playback, the picture

may not be in colour. Alternatively, the top of the TV
screen may be distorted.

Note for only NTSC Playback on PAL system TV
This function is designed to allow only the playback of
tapes recorded by NTSC signals on a PAL system TV.

The NTSC signal is not completely converted to a PAL

signal. For this reason, images played back by this

function cannot be recorded correctly on other VCRs.

•NTSC 3.58 recording requires NTSC SELECT to be in

the 3.58 position, however if NTSC SELECT is in this

position when recording a NTSC 3.58 signal, no colour is
available for the PAL TV. Once the recording is
completed, you then need to switch 3.58 to NTSC P.B.
to view the recording in colour on PAL TV.

Other Automatic Functions

Automatic Playback

When a video cassette without an erasure prevention tab

is inserted, the VCR starts playback automatically.

VCR-off Playback

When the VCR is off, an inserted video cassette can be

played back by pressing PLAY.

Automatic Rewinding

When the tape reaches its end during recording (except
for timer recording) or playback, it will automatically be

rewound to the beginning.
During OTR, this function will not work.

Automatic Switching Off and Ejection

When the VCR is switched off, an inserted video cassette
can be ejected by simply pressing EJECT. The VCR will

eject the video cassette and automatically turn itself off
again.

CO

C

.o

■4^

5

cu

§

o
c

§

33