Panasonic NV-HD620 - Manual (Page 32)

Editing
Assembly Editing
This function can be used to create an edited tape from
other recordings or video sources.
New scenes can be added to the end of existing ones.
Preparations
•Connect a movie camera or other VCR to this VCR as
shown.
• Insert a recorded video cassette tape with an intact
erasure prevention tab.
•Select the required video source by pressing INPUT
SELECT to set A1 or A2.
• Set NTSC SELECT.
4.43: When recording NTSC 4.43 signals from
an external signal source.
3.58: When recording NTSC 3.58 signals from
an external signal source.
When dubbing a NTSC tape, keep the NTSC SELECT
on both the recording and playback VCRs at the 4.43 or
3.58 position.
When recording PAL signals from External Signal
Source, the tape is recorded in the PAL system
regardless of position of NTSC SELECT.
, CD® ®-o
!D:iD!o
a®
® ©
r/T-
®00(T|.
AUDIO IN/
NTSC SELECT VIDEO IN (AV2) AUDIO IN/VIDEO IN (AVI)
Operations
^ Search for the end of the last recording.
Press PAUSE/SLOW.
PAUS^SLOW
l/l
Press REC/OTR to switch the VCR
from the pause mode to the recording
Standby mode.
REC/OTR
CC)
start the new recording by pressing
PAUSE/SLOW again.
PAUSeSLOW
________
m
__________
Press STOP to stop recording.
□
Note:
The new sound will be recorded on both the normal and
Hi-Fi sound tracks, only monaural sound recording is
possible on the normal sound tracks.
32