Panasonic NV-HD620 - Manual (Page 10)

same way that you watch TV broadcasts.
If you have connected the VCR to the TV through the
video and audio input sockets, then you do not need
to follow the procedure below. Instead, simply select
the AV mode on the TV.
When the VCR is turned on after unpacking and
connecting the aerial cable and the mains lead, Plug
in Auto Tuning starts automatically.
•If the VCR is turned on with the antenna not connected,
all channels are skipped. Therefore, firmly connect the
antenna and then turn the VCR off and on again to
execute Auto Tuning.
•When Auto Tuning is canceled halfway, Auto Tuning is
not executed even if the VCR is turned off and then
turned on again. In this case, see page 11 “To restart
Plug in Auto Tuning”.
Operations Display Symbol
1 Turn on the TV and VCR.
Ensure that the VCR is connected to the
aerial cable.
•Auto Tuning starts. (See next page.)
VCFVrv o
VCR
Select the VCR mode.
(no
Select the video playback channel not used
for any TV station.
H: Channels
L: Channel 2
On Screen Display
AUrOTUNMO
iMPDOORCSS.
PLEASE WMT.
CM22 SEARCH /^ 21
EKbiAENU
(During Auto Tuning) (After Auto Tuning)
Select a programme number on the TV
which you wish to use as the video viewing
channel. Then tune in the TV to the picture
from the screen being auto tuned or the
screen selected with the v and /\ of the
VCR.
•During Auto Tuning, the TV programme screen does not
appear, and the Auto Tuning screen appears instead.
10