Auto tuning using the on screen display, Introduction, Preparations – Panasonic NV-HD620 User Manual
Page 12: Operations on screen display, Select tuner preset, Channels that can be received, Settings using the on screen display, Ci:)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Auto Tuning using the On Screen Display
Introduction
The VCR is tuned automatically by Plug In Auto Tuning.
However, Auto Tuning using the On Screen Display
should be performed according to the following method if
necessary.
Preparations
•Confirm that the TV is on and the VCR viewing channel
is selected,
•Turn on the VCR and select any programme position
except A1 or A2.
•Press VCR/TV to select the VCR mode.
(NV-HD620EA only)
Operations On Screen Display
1
o
•LANGUACe
CtOOCSET
TiMeRPReser >
Q-CODeCH№
OFTKXt
DEMON871U1ION
SELECT
;aa,EKTER
EW :MBNU
Press
MENU.
Select TUNER PRESET.
CX>'
ENTER
O
UWOUAGE
, CLOCKSET
^TtWER PRESET
,(M»OECHSEr
PEUOMSTRATION
Ì№LECr^':aD,etrrEir
ERO:,-,
*■ .1-
ci:)
-AUTOTTJME.*
MJAOliiU”*
SEARCH’
n№
3ELECT:aB
©
Select
AUTO TUNE
and
press ◄ or ►.
•When Auto Tuning is completed,
the on screen display disappears
and programme position 1 is
selected.
The number displayed here is the
number of channels still to be auto
tuned.
Notes:
•Auto Tuning searches for TV stations from VHP
minimum to UHF maximum and memorizes every tuned
programme position. Other programme positions are
skipped.
•Auto Tuning takes seven or more minutes to complete its
search.
•If the VCR is not correctly tuned by Auto Tuning, follow
the procedure on the next page.
•To rearrange the channels at the desired channel
positions, proceed with Manual Tuning.
Channels that can be Received
- UHF
NV-HD620A
0-12
21-69
NV-HD620EA
1-11
21-69
12