Specifications, Note to electrical appliance dealers only – Panasonic NV-HD620 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Specifications
NV-HD620A/EA
Power Source:
Power Consumption:
240 V AC 50/60 Hz (NV-HD620A)
230 V AC 50/60 Hz (NV-HD620EA)
21 watts (NV-HD620A)
22 watts (NV-HD620EA)
Video Recording System:
Video Heads:
Audio Heads:
Tape Speed:
Tape Format:
Record/Playback Time:
FF/REW Time:
V
ìdeo
Television System:
Modulation System:
Input Level:
Output Level:
AUDIO
Input Level:
Output Level:
Audio Track:
Video Horizontal Resolution:
Signal-to-Noise Ratio;
Dynamic Range:
Audio Frequency Response:
Wow and Flutter;
Operating Temperature:
Operating Humidity:
Weight:
Dimensions;
Standard Accessories:
2 rotary heads, helical scanning system
4 heads
2 heads (Hi-Fi)
PAL
SP; 23.39 mm/sec.
LP; 11.7mm/sec.
NTSC
SP; 33.3 mm/sec.
EP; 11.1 mm/sec.
VHS tape
PAL
SP;
PAL
LP;
240 min. with NV-E240
480 min. with NV-E240
approx. 90 sec. with NV-E180
CCIR; 625 lines, 50 fields, PAL colour signal
ElA; 525 lines, 60 fields, NTSC colour signal
Luminance: FM azimuth recording
Colour signal: converted subcarrier phase shift recording
VIDEO IN (PHONO):
1.0 Vp-p,
VIDEO OUT (PHONO):
1.0 Vp-p,
RF modulated:
UHF channel AU37±6 (NV-HD620A),
VHF channel NZ 2 or 3 (NV-HD620EA),
AUDIO IN (PHONO):
-6dBV,
AUDIO OUT (PHONO):
-6 dBV,
1 track (normal-mono only), 2 channels (Hi-Fi sound-stereo)
Colour; more than 240 lines (SP)
Video: more than 43 dB (SP)
Audio; more than 90 dB (Hi-Fi audio track)
20 Hz-20 kHz
0.005% Wrms/Hi-Fi
5°C-40°C
35%-80%
3.9 kg
430 (W)X87 (H)X300.5 (D) mm
1 pc. RF coaxial cable
1 pc. remote controller
2 pcs. “R6" size batteries
1 pc. AC mains lead
1 pc. Audio/Video Cable
75 ohm, terminated
75 ohm, terminated
75 ohm
75 ohm
more than 50 kohm
less than 1 kohm
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
Note to electrical appliance dealers only
To Demonstrate “Programme List Search”
1 Eject a video cassette, if it has been inserted.
2 Keep pressing SEARCH on the remote controller for
at least 5 seconds,
search
O)
3 Then, the demonstration mode will be displayed on
the TV screen.
On Screen Display
2
19N0
«;1S
e
10H0 1S:00
• a 10MO 22:00>
OEKONSmATION
38