3 troubleshooting flowchart, 3 troubleshooting cases -17, Troubleshooting flowchart – Panasonic NN46240-710 User Manual

Page 88

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Nortel Secure Router 8000 Series

Troubleshooting - VPN___________

3 BGP/MPLS IP VPN troubleshooting

[PE1-bgp-af-vpnv4] peer 3.3.3.3 enable

NOTE

VPNv4 routes can transport only after an EBGP peer is established in VPNv4 address family. You can
view all VPNv4 BGP peers by using the display bgp vpnv4 all peer command.

# Import routes of the directly connected network segment between PE and CE to vpna:

[PE1-bgp] ipv4-family vpn-instance vpna

[PEl-bgp-vpna] import-route direct

3.2.3 Troubleshooting flowchart

After configuration on respective routers shown in Figure 3-3, VPN users PC1 and PC2 cannot

exchange information with each other.

Troubleshoot the network according to the flowchart shown in Figure 3-4.

Issue 5.3 (30 March 2009)

Nortel Networks Inc.

3-9