Panasonic NN46240-710 - Manual (Page 179)

5 VPLS troubleshooting
Nortel Secure Router 8000 Series
_________ Troubleshooting - VPN
5.5 Diagnostic tools
5.5.1 display commands
Command Description
display vsi vsi-name verbose Displays current VSI configuration.
If you do not specify a vsi-name, information on all
VSIs appears.
display vsi remote [ ldp | bgp ] Displays the labels received by the remote.
You can choose LDP or BGP.
display vpls fib verbose Displays the detailed information about the
VPLS_FIB.
display vpls mid interface vsi
vs~i--name
Displays information about the VPLS_MID.
When you use the display vpls mid token vsi
vsi-name command, the token value of the PW in the
MID table appears.
display vpls connection Displays information about VPLS connections.
display tunnel-info all Displays information about this tunnel.
Tunnel information includes information about the
PW.
display bgp vpls all Displays the remote label block of BGP VPLS.
display mpls l2vc Displays the status of this VLL.
display vpls statistics Displays VPLS statistics.
display mpls ldp session Displays information about LDP sessions.
display mpls lsp Displays information about MPLS LDP.
5.5.2 debugging command
Command Description
debugging mpls l2vpn event Debugs VPLS events.
debugging mpls l2vpn timer Debugs the VPLS timer.
debugging mpls l2vpn vpls_fib Debugs information on the VPLS_FIB.
debugging mpls l2vpn vpls_mid Debugs information on the VPLS_MID
debugging mpls l2vpn
advertisement Debugs Layer 2 VPN BGP or LDP message
advertisement.
debugging mpls packet Debugs the MPLS packet forwarding.
5-20 Nortel Networks Inc. Issue 5.3 (30 March2009)