Local connection, 4 troubleshooting procedure, Troubleshooting procedure – Panasonic NN46240-710 User Manual
Page 124
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 MPLS L2VPN troubleshooting
Nortel Secure Router 8000 Series
_________ Troubleshooting - VPN
Local connection
Figure 4-10 Troubleshooting flowchart of the MPLS Layer 2 VPN local connection fault
4.2.4 Troubleshooting procedure
The steps of troubleshooting are as follows:
Step 1 Check the AC status of the PE of both ends.
Before establishing the Layer 2 VPN connection, ensure the AC status is Up. If the status of AC
is Down, remove the fault on the AC link and ensure the AC status on PE is Up.
CD NOTE
•
When the AC type is VLAN, configure the subinterface.
•
When the AC type is ATM, configure the VC.
Step 2 Check the status of the Layer 2 VPN connection.
On PE, use the following command in any view to check the AC status and the Layer 2 VPN
connection status:
4-14
Nortel Networks Inc.
Issue 5.3 (30 March2009)