Panasonic NN46240-710 - Manual (Page 138)

4 MPLS L2VPN troubleshooting
Nortel Secure Router 8000 Series
_________ Troubleshooting - VPN
Session State : down
AC State : down
VC State : down
VC ID : 100
VC Type : hdlc
Destination : 2.2.2.8
Local Group ID : 0
Remote Group ID : 0
Local VC Label : 119809
Remote VC Label : 0
Local VC MTU : 4470
Remote VC MTU : 0
Local VCCV : Disable
Remote VCCV : None
Local Frag : Disable
Remote Frag : None
Local Ctrl Word : Disable
Remote Ctrl Word : None
Tunnel Policy : -­
Traffic Behavior : -­
PW Template Name : -­
VC tunnel/token info : 0 tunnels/tokens
Create time : 0 days, 0 hours, 6 minutes, 14 seconds
UP time : 0 days, 0 hours, 0 minutes, 0 seconds
Last change time : 0 days, 0 hours, 6 minutes, 14 seconds
# Change the link layer protocol of POS 4/0/0 to HDLC:
[PE-Pos4/0/0] link-protocol hdlc
# Recheck POS 4/0/0 and find that no VC exists:
[PE-Pos4/0/0] display mpls l2vc interface pos 4/0/0
# Check PE and find that only one VC is left. This VC is on POS 4/1/0 whose link layer
protocol is HDLC:
[PE] display mpls l2vc
Total ldp vc 1 0 up 1 down
*Client Interface
Session State
AC Status
VC State
VC ID
VC Type
Destination
Local VC Label
Remote VC Label
Control Word
Local VC MTU
Remote VC MTU
Tunnel Policy Name
Traffic Behavior Name
PW Template Name
Create time
UP time
Pos4/1/0
down
down
down
100
hdlc
2.2.2.8
119809
0
Disable
4470
0
0 days, 0 hours, 8 minutes, 26 seconds
0 days, 0 hours, 0 minutes, 0 seconds
4-28 Nortel Networks Inc. Issue 5.3 (30 March2009)