Dynon Avionics D100 Series to SkyView Conversion Guide - Manual (Page 41)

D10 and D100 Series Conversion To SkyView Guide – Rev D Page 41
D25
Female
Connector
Pin No.
HS34 Function
SV-ARINC-429
Function Notes for conversion to
SV-ARINC-429
12 ARINC 429 TX B ARINC TX B
Reroute this wire to SV-ARINC-429 pin 12.
Same signal as Pin 13
13 ARINC 429 TX B ARINC TX B
Reroute this wire to SV-ARINC-429 pin.
Same signal as Pin 12.
14 CDI + when Left
Unused pin,
not connected Not used in SkyView system.
Remove this wire.
15
VOR + when From
flag shown Unused pin,
not connected Not used in SkyView system.
Remove this wire.
16 LOC -
Unused pin,
not connected Not used in SkyView system.
Remove this wire.
17 GS + when Down
Unused pin,
not connected Not used in SkyView system.
Remove this wire.
18
GS + when Flag
hidden Unused pin,
not connected Not used in SkyView system.
Remove this wire.
19 Resolver C
Unused pin,
not connected Not used in SkyView system.
Remove this wire.
20 Resolver H
Unused pin,
not connected Not used in SkyView system.
Remove this wire.
21 Resolver E
Unused pin,
not connected Not used in SkyView system.
Remove this wire.
22 ARINC 429 RX 2 A ARINC 2 RX A Reroute this wire to SV-ARINC-429 pin 22.
23 ARINC 429 RX 1A ARINC 1 RX A Reroute this wire to SV-ARINC-429 pin 23.
24 ARINC 429 TX A ARINC TX A
Reroute this wire to SV-ARINC-429 pin 24.
Same signal as Pin 25.
25 ARINC 429 TX A ARINC TX A
Reroute this wire to SV-ARINC-429 pin 25.
Same signal as Pin 24.