Dynon Avionics D100 Series to SkyView Conversion Guide - Manual (Page 39)

D10 and D100 Series Conversion To SkyView Guide – Rev D Page 39
HS34
Male
Connector
Pin No.
HS34 Male Connector
Function
Notes for conversion to
SV-HARNESS-D37
and
SV-EMS-220 Main Sensor Harness
25
VOICE AUDIO
OUTPUT (8V peak-
peak)
If this wire was used for audio output, reroute this wire to SkyView
display. Because HS34 Audio was mono, connect this wire to both
SkyView Display
PIN 13 – AUDIO OUTPUT LEFT
and
PIN 31 – AUDIO OUTPUT RIGHT
If a 10K potentiometer was installed on this wire to adjust volume,
remove it (SkyView has internal volume adjustment).