Dynon Avionics D100 Series to SkyView Conversion Guide - Manual (Page 30)

D10 and D100 Series Conversion To SkyView Guide – Rev D Page 30
EMS Sensor Type Conversion to SkyView Sensor Type
Dynon EMS’ use numeric sensor types to specify what sensor is connected to a particular input.
In SkyView SENSOR INPUT MAPPING, full names and often PNs are used.
EMS-D10 / EMS-D120 / FlightDEK-D180 Sensor Type
Description in Manual SkyView Sensor Description
SENSOR INPUT MAPPING
Ammeter Sensor – Type 1
Dynon P/N 100412-000 C37 P24/25 only
AMPS – AMMETER SHUNT (100412-000)
Ammeter Sensor – Type 2
GRT CS-01 C37 P8, C37 P22, or C37 P31 only
AMPS – AMMETER HALL EFF -x / 0 / +x (GRT CS-01)
Carburetor Temp Sensor – Type 1
Dynon P/N 100413-000
(with black wires)
DYNON CARB TEMP (100413-000 BLK/BLK)
Carburetor Temp Sensor – Type 2
GRT CARB-01
This sensor is not supported in SkyView
Carburetor Temp Sensor – Type 3
Dynon P/N 100468-000 (with white/black wires)
DYNON CARB TEMP (100468-000 BLK/WHT)
Coolant Temp Sensor – Type 1
Dynon P/N 100409-001
1/8”-27 NPT FLUID TEMP (100409-001) or
5/8”-18 NPT FLUID TEMP (100409-000)
SkyView bug - see which one works
Coolant Temp Sensor – Type 2
Chevrolet LS7 pre-installed
This sensor is not supported in SkyView
Coolant Temp Sensor – Type 3
Dynon P/N 100409-000
1/8”-27 NPT FLUID TEMP (100409-001) or
5/8”-18 NPT FLUID TEMP (100409-000)
SkyView bug - see which one works
Coolant Temp Sensor – Type 4
Rotax 801-10-1
ROTAX CHT OR OIL (801-10-1)
Coolant Pressure Sensor – Type 1
Dynon P/N 100411-000
0-30 PSI FLUID PRESSURE (100411-000)
Coolant Pressure Sensor – Type 2
Dynon P/N 101716-000 Kavlico 50 PSI
KAVLICO 50PSI FLUID PRESS (101716-000)
Fuel Level – Type 1
Resistive float-type sender
LEVEL – FUEL LEVEL (RESISTIVE)
Fuel Level – Type 2
Capacitive sender (voltage output)
FUEL LEVEL (CAPACITIVE)