BendixKing KLN 89B - Pilots Guide User Manual

Page 98

KLN 89/KLN 89B Pilot’s Guide

Basic GPS Operation

3-61

Basic GPS Operation

Chapter 3

Repeat step 5 for the ones digit of
the year field.

Press

to start the KLN 89(B)

using the newly entered date
(figure 3-177).

To set the time on the SET 2 page:

Select the SET 2 page if it is not
already selected.

Turn on the cursor and move it to
the time zone field (figure 3-178).

Change the time zone with the
right inner knob, if desired (figure
3-179). A listing of the time zones
and their abbreviations is con-
tained in section 3.2, “Turn-on and
Self Test”.

Move the cursor to the time field.
The hours and minutes will appear
in inverse video.

Select the correct hour (figure
3-180). Remember, the KLN
89(B) uses 24 hour time. If it is
1:00 P.M. or later, add 12 hours
(for example, 2:30 P.M. becomes
14:30).

Move the flashing part of the
cursor to the tens of minutes,
select the proper number (figure
3-181), then move on to the last
digit and set it.

Press

to start the clock

running (figure 3-182). Note that
the seconds reset to zero when
you do this.

NOTE: The above format for the
SET2 page applies to ORS 02 soft-
ware. ORS 01 software has a
different page layout; however, the
same steps are followed to set the date or time.