BendixKing KLN 89B - Pilots Guide User Manual

Page 62

KLN 89/KLN 89B Pilot’s Guide

Basic GPS Operation

3-25

Basic GPS Operation

Chapter 3

Move the cursor one space to the
right and select the second char-
acter, “A” (figure 3-82).

Select the third character, “P”
(figure 3-83). Up pops Napoleon
and its identifier, ANX!

Turn off the cursor (

) so you

can view other pages.

We will now use another example to
show how we may enter a few char-
acters and then scan through all the

waypoints in the data base beginning with those characters. Let’s use
this method to find La Guardia Airport in New York City.

To select an airport by scanning the airport name:

With the cursor off and the right inner knob in the “in” position,

select the APT (Airport) 1 page. The airport displayed at this

time is not important.

Turn on the cursor (

Move the cursor over the first
character in the airport name
(figure 3-84).

Change the first character to an
“L”.

Move the cursor one place to the
right, and select an “A”
(figure 3-85).

Now, move the cursor one place
to the right and pull the right inner
knob out. The rest of the airport
name field will flash (figure 3-86).

Turn the right inner knob clock-
wise, scanning through
La Crosse Municipal, La
Grande/Union airport, and
several others. Eventually, you
will arrive at “LA GUARDIA”
(figure 3-87). By turning off the
cursor (

), pushing the right