Basic gps operation 3-14 – BendixKing KLN 89B - Pilots Guide User Manual

Page 51

Basic GPS Operation

3-14

Basic GPS Operation

Chapter 3

If required, rotate the right outer
knob to position the cursor
(figure 3-40).

Rotate the right inner knob to
select the first character of the
waypoint identifier (figure 3-41).

Turn the right outer knob one
click clockwise to move the cursor
to the second character position
(figure 3-42).

Rotate the right inner knob to
select the second character
(figure 3-43).

Use the right outer and inner
knobs in this manner until the
complete waypoint identifier is
displayed (figure 3-44). Note that
you may not have to enter the
last characters of the identifier
because each time you enter a
character, the KLN 89(B) offers
you the first identifier in the data
base beginning with the charac-
ters you have entered.

If Ent is flashing on the left side
of the screen, then press

This will prompt the KLN 89(B) to
display a waypoint page for the
waypoint identifier you just
entered (figure 3-45).

Verify the waypoint information
displayed, and then press

again to approve the waypoint
page. The display will return to
the page previously displayed
(figure 3-46).

Often, you will find yourself entering
airports that begin with the same
character over and over again. In sec-
tion 2.3, you learned how the KLN