Talkaphone VOIP-500K Native VoIP Keypad Emergency Phone - Manual (Page 18)

VOIP-500 Series Phone
Configuration and Operation Manual
Page 18 of 90
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
5. Enter Outbound Proxy details: If a separate outbound proxy is not being used please enter the SIP
registrar information again. (Secondary and Tertiary details can be assigned for failover)

Username: This is an optional field however it is required when Authentication is enabled on the SIP
registrar. Valid entries include alphanumeric and special characters (underscore “_” and period “.”)

Password: This is an optional field however it is required when Authentication is enabled on the SIP
registrar. Valid entries include alphanumeri
c and special characters (except “&”).

IP Address and Port: Configure the IP Address and Port of the SIP registrar on which you want to
register the phone. Valid port range is 1024-49151.
6. Click Apply. The following type of registration status appears based on your selection:

Registering as @ - Registration is in progress with SIP registrar.

Registered as @ - Registration is completed and phone is able
to receive incoming calls on the registered phone number.

Unregistered as @ - Phone is not registered for incoming calls.
Outbound calls can still be established via outbound proxy.