Canon L250 - Manual (Page 267)

Attaching the Handset to Your Unit
To attach the handset to your unit, follow these steps:
1
Use a screwdriver to remove the two covers on the left side of the unit.
2
Remove the screws from the plugs and insert the plugs in the holes on the handset cradle.
3
Insert the plugs with the handset cradle in the holes on the unit.
If you have difficulty inserting the plugs, turn the unit so that the left side is facing you
and the right side is placed against a wall. This will allow you to insert the plugs without
the unit moving.
Optional Handset
B-3