Canon L250 - Manual (Page 160)

Network FAX/TEL Switching (New Zealand Only)
Telecom N.Z. offers the FaxAbility capability. If you subscribe to this service, your line is assigned two
numbers: one for fax and one for phone. When the fax number is called, the network sends a specific
ringing tone which your unit recognises and automatically handles as a fax call. If the phone number is
called, a different ringing tone is sent out from the network so that the call is handled as a voice call.
This means that there is no switching delay at the caller’s end.
When you select NET. SWITCH from the RX MODE setting in the RX SETTINGS
menu, the receive mode will be locked on Fax/Tel Mode. You will be unable to change
the receive mode with the RECEIVE MODE button.
j Setting the FAX-L250 for Network Switch
Follow these steps to select NET. SWITCH.
1
Press FUNCTION.
2
Use or to select RX SETTINGS.
3
Press START/COPY, then use or to select
RX MODE.
4
Press START/COPY, then use or to select
NET. SWITCH.
FUNCTION
FUNCTION
RX SETTINGS
RX MODE
NET. SWITCH
Receiving Faxes
6-14