WEATHER GUARD Model 222-3 Accessory Cross Member, Minivan - Manual (Page 5)

5
STEP 5. For Astro/Safari
Drill the marks at the rear of the roof with a 9/32" drill bit, then apply a small bead of E-6000 around the holes. Drill
the marks at the front of the roof with a 13/32" bit. Apply E- 6000 Sealant to the roof around each hole. Install Blind
Fastener following the installation instructions on the back page. Once installed, fill the top of the Blind Fastener holes
with E-6000 Sealant. Fasten the rack as shown in Figures 6. & 7.
Mounting
Bracket
w/ Stand
1/4” Lock
Washer
Clamp Bar
Spacer
Mounting
Pad
Roof
13/32" hole with Blind
Fastener installed
E-6000
Sealant
Figure 6. Astro Rear Stand Mounting
5/16” Flat Washer
E-6000
Sealant
Roof
1/4-20 Nylon Lock Nut
Mounting
Bracket
w/ Stand
1/4-20 x 1-1/2"
Hex Head Bolt
Figure 7. Astro Front Stand Mounting
1/4-20 x 1-1/2"
Hex Head Bolt
Roof Mounting
Plate
Roof Mounting
Pad
9/32" hole
STEP 5. For Astro/Safari
Drill the marks at the rear of the roof with a 9/32" drill bit,
then apply a small bead of E-6000 around the holes. Drill
the marks at the front of the roof with a 13/32" bit. Apply
E- 6000 Sealant to the roof around each hole. Install Blind
Fastener following the installation instructions on the back
page. Once installed, fill the top of the Blind Fastener
holes with E-6000 Sealant. Fasten the rack as shown in
Figures 6. & 7.
Mounting
Bracket
w/ Stand
5/16” Flat Washer
1/4-20 x 1-1/2"
Hex Head Bolt
Clamp Bar
Spacer
Mounting
Pad
Roof
5/16” Flat Washer
E-6000
Sealant
1/4-20 Nylon Lock Nut
Figure 8. Windstar Mounting