WEATHER GUARD Model 216-5 All-Purpose Rack, Steel, Full-Size, 3 Cross Member - Manual (Page 2)

205 215 216* 2055 2056* Description
4 6 4 2 0 Stand (p/n 23-0198)
0 0 2 0 2 Center Stand (Ford) (p/n 23-0199)
1 2 2 1 1 Crossmember (p/n 20-0188)
4 6 6 2 2 Universal Clamp (p/n 21-0826)
2 3 3 1 1 Tie Down Loops (p/n 23-0109)
4 6 6 2 2 Mounting Cushion (p/n 21-0629)
1 1 1 1 1 Sealant (p/n 21-9121)
4 6 6 2 2 Spacer, Clamp (p/n 21-0827)
1 1 1 0 0 Ladder Stop Assembly
2 2 2 0 0 Ladder Straps
1 1 1 0 0 Front Crossmember (p/n 23-0394)
2
PARTS LIST
Figure 3. Center Stand Identification
*NOTE: Models 216 and 2056 are
used exclusively on Ford and Chevy
GMT600/GMC Savana vans due to
the upward bow in the center of the
gutter. The front and rear Stands have
7" long sockets. The third (center)
Stand can be identified by the 5"
socket that is 5/8" lower (
Stand B as
shown in Figure 3.) for the Ford and
GM.
Crossmember
Front Crossmember
(strap loop this end)
Mounting
Cushion
Ladder Stop
Assembly
(fasten loosely)
Figure 4. Rack Assembly
(tighten all fasteners after assembly)
3/8-16 x 3/4" Thread
Cutting Screw
Socket
Ladder Strap
Step 1. Rack Assembly
The Ladder Stop Assembly will face
rearward on the rear Crossmember/
Stand Assembly. If desired, it may be
assembled on the driver side. Fasten
the Crossmembers in the Stands.
Tie Down Loop
(fasten loosely)