WEATHER GUARD Model 9506-3-01 Security Shelf Door, 10-1/2 in x 60 in - Manual (Page 2)

2
INSTALLATION INSTRUCTIONS
STEP 1: Determine Shelf Door Assembly
location on Shelf Unit. Shelves need to be
spaced seven (7) End Panel holes apart
(bolt to bolt) for the door to fit correctly.
Place Door Assembly against the opening
between shelves and fasten hinge to the
row of shelf holes using one (1) 1/4-20 x
5/8" Hex Head Bolts and 1/4-20 Nylon Lock
Nuts per hole in hinge. The length of the
Shelf Door Assembly will determine the
number of fasteners used.
STEP 2: Fasten the Latch Plate to the bottom of
the shelf using the 5/16 carriage bolt and 5/16
lock nut. Locate the latch plate as shown with
the vertical tab facing the shelf door.
STEP 3: Count holes from hinge and attach the
cables and support tabs to the end panels using
the1/4-20 hex head bolts and lock nuts.
STEP 4: Place a section of adhesive-backed
foam to the latch plate and support tabs for a
more quiet operation.
INSTALLATION IS COMPLETE.
Part No. 24-0311 REV. C ECN 5305 04/13