Pilz PNOZ s1 C 24VDC 2 n/o - Manual (Page 10)

PNOZ s1
Operating Manual PNOZ s1
21393-EN-07
10
Conventional thermal current
while loading several contacts
750101 751101
Ith per contact at UB DC
Conv. therm. current with 1 con-
tact
3,00 A 3,00 A
Conv. therm. current with 2 con-
tacts
3,00 A 3,00 A
Times 750101 751101
Switch-on delay
With automatic reset typ. 100 ms 100 ms
With automatic reset max. 150 ms 150 ms
With automatic reset after power
on typ.
100 ms 100 ms
With automatic reset after power
on max.
150 ms 150 ms
With manual reset typ. 50 ms 50 ms
With manual reset max. 60 ms 60 ms
Delay-on de-energisation
With E-STOP typ. 30 ms 30 ms
With E-STOP max. 40 ms 40 ms
With power failure typ. 30 ms 30 ms
With power failure max. 40 ms 40 ms
Recovery time at max. switching
frequency 1/s
After E-STOP 100 ms 100 ms
After power failure 100 ms 100 ms
Supply interruption before de-ener-
gisation
10 ms 10 ms
Environmental data 750101 751101
Climatic suitability EN 60068-2-78 EN 60068-2-78
Ambient temperature
Temperature range -10 - 55 °C -10 - 55 °C
Storage temperature
Temperature range -40 - 85 °C -40 - 85 °C
EMC EN 60947-5-1, EN 61000-6-2, EN
61000-6-4
EN 60947-5-1, EN 61000-6-2, EN
61000-6-4
Vibration
In accordance with the standard EN 60068-2-6 EN 60068-2-6
Frequency 10,0 - 55,0 Hz 10,0 - 55,0 Hz
Max. amplitude 0,35 mm 0,35 mm
Airgap creepage
In accordance with the standard EN 60947-1 EN 60947-1
Overvoltage category III III
Pollution degree 2 2
Rated insulation voltage 250 V 250 V
Rated impulse withstand voltage 4,00 kV 4,00 kV