Citizen Systems iDP3240 - Manual (Page 72)

— 52 —
(1) Printer status (When n = 1 is specified)
Bit Status Hex. Decimal
0 Unused (Fixed at 0) 00 0
1 Unused (Fixed at 1) 02 2
Status of pin 3 of Drawer Kick-Out
00 0
Connector = L
2
Status of pin 3 of Drawer Kick-Out
04 4
Connector = H
3
Online status 00 0
Offline status 08 8
4 Unused (Fixed at 1) 10 16
5 Undefined — —
6 Undefined — —
7 Unused (Fixed at 0) 00 0
(2) Status caused by an offline condition (When n = 2 is specified)
Bit Status Hex. Decimal
0 Unused (Fixed at 0) 00 0
1 Unused (Fixed at 1) 02 2
2
Cover closed 00 0
Cover open 04 4
Not in paper feed state triggered by
00 0
FEED switch
3
In paper feed state triggered by FEED
08 8
switch
4 Unused 10 16
Printing is not stopped because of
00 0
“paper out” state
5
Printing is stopped because of
20 32
“paper out” state
6
Error not occurred 00 0
Error occurred 40 64
7 Unused (Fixed at 0) 00 0
Bit 5: Printing is stopped if the paper end detector detects a
“paper out” state, or if the printer is out of paper when
the Paper Near-end Sensor is enabled by ESC c 4. At this
time, bit 5 = “1”.