Esc s – Citizen Systems iDP3240 User Manual

Page 101

— 81 —

ESC S

[Function]

Selecting STANDARD MODE

[Code]

<1B>H<53>H

[Outline]

Switches from PAGE MODE to STANDARD MODE.

[Caution]

• This command is only effective if it is entered when in PAGE

MODE.

• Any data mapped in PAGE MODE is erased.

• After this command is executed, the beginning of the line is

taken as the next print start position.

• The print area defined by ESC W is initialized.

• The commands listed below, which have separate settings for

STANDARD MODE and PAGE MODE, are changed to the
settings for STANDARD MODE use.

(1) Spacing setting:

ESC SP

(2) Line feed width setting: ESC 2, ESC 3

• STANDARD MODE is selected when the printer is turned on

or reset, or when ESC @ is executed.

[See Also]

FF, ESC FF, ESC L