Citizen Systems iDP3240 - Manual (Page 63)

— 43 —
No. Command Function Mode Code Page
In the Mode column: S = STANDARD MODE, P = PAGE MODE
* shows the command affected by GS P.
30 ESC T
Selecting the character printing direction
P <1B>H<54>H 82
in PAGE MODE
31 ESC V
Specifying/Canceling 90°-right-turned
S <1B>H<56>H 83
characters
<1B>H<57>H
32 ESC W Defining the print area in PAGE MODE P * 84
33 ESC \ Specifying the relative position S.P.
*
<1B>H<5C>H 86
34 ESC a Aligning the characters S.P. <1B>H<61>H 87
35 ESC c3
Selecting the Paper Sensor valid for
S.P.
<1B>H<63>H<33>H
88
a paper end signal output
36 ESC c4
Selecting the Paper Near-end Sensor valid
S.P.
<1B>H<63>H<34>H
89
for print stop
37 ESC c5 Enabling/Disabling the panel switches S.P.
<1B>H<63>H<35>H
90
38 ESC d Printing and feeding the paper by “n” lines S.P. <1B>H<64>H 91
39 ESC p Generating the specified pulses S.P.
<1B>H<70>H
92
40 ESC t Selecting the character code table S.P. <1B>H<74>H 93
41 ESC { Specifying/Canceling the inverted characters S <1B>H<7B>H 94
42 GS ! Specifying the character size S.P. <1D>H<21>H 95
43 GS $
Specifying the absolute vertical position
P
*
<1D>H<24>H
97
of characters in PAGE MODE
44 GS * Defining the download bit image S.P.
<1D>H<2A>H
98
[]n1
Чn2Ч8
45 GS ( A Execution of test printing S
<1D>H<28>H<41>H
100
46 GS / Printing the downloaded bit image S.P. <1D>H<2F>H 101
47 GS : Starting/Ending macro definition S.P. <1D>H<3A>H 102
48 GS B
Specifying/Canceling the black/white
S.P. <1D>H<42>H 103
inverted printing
49 GS H
Selecting of printing position of HRI
S.P. <1D>H<48>H 104
characters
50 GS I Sending the printer ID S.P. <1D>H<49>H 106
51 GS L Setting the left margin S *
<1D>H<4C>H
107
52 GS P Specifying the basic calculation pitch S.P.
<1D>H<50>H
108
(1)<1D>H<56>H
53 GS V Cutting the paper S.P. * (2)<1D>H<56>H 109