Xpres Cut Lite - Manual (Page 8)

Installation
Click on the drop down list, select the USB or Expert 24 option and then click ‘Connect’. You should
now see the window below, the Model and Version should be visible and the options are now active:
Select the relevant force required for the material you intend to cut and click ‘Update Setting’ (a guide
for forces can be found on our website at www.xpres.co.uk).
Now close the VLCD to complete the setup. The VLCD software must be closed for the cutter operate.
Connecting t sytem with VLCD he Lite Xpres Cut
Double click the VLCD2.EXE on your desktop, you should see the window below:
®
6