Xpres Cut Lite - Manual (Page 18)

Click ‘Bottom Left Corner’ from the drop down list within the Print Preview screen to position the
design along the left hand edge of the print preview ready to print.
Operation
You will see the layout below (the print preview page will always show a pre determined page layout
regardless of the page size set in CorelDRAW beforehand).
The area above highlighted in red shows the leading edge of the roll of vinyl placed in the cutter.
Placing the design in the ‘bottom left hand corner’ on screen positions the design to the front of the
vinyl in the cutter to maximise the vinyl usage when cutting.
16