Xpres Cut Lite - Manual (Page 3)

Xpres Cut Lite Overview
Thankyou for purchasing the Lite system.
Cutter Overview
® Xpres Cut
Object Description
A Primary Pinch Roller To help hold the media during cutting.
B Slicing Groove To help slice off media.
C Alignment Ruler To align media with clear guideline marks
D Carriage To help perform cutting job with installed blade or pen.
E Blade Holder To hold the blade.
F Platen The surface for holding and supporting media in operation.
G Cutting Strip To protect blade and plate in operation.
H Control Panel To consist of 10 control keys and 6 LED lights.
Object Description
K AC Power Connector To insert the AC power cord.
L Fuse 3Amp.
M Power Switch To turn on or off the machine.
N USB Connector To connect the machine and a computer through a USB cable.
O Serial Interface Connector To connect the machine and a computer through a RS-232 cable.
1
®