Assign an image to the group policy – Welch Allyn Cardioperfect Workstation, Software Version 1.6.5 - Installation Guide User Manual

Page 52

Text mode
Original mode

CardioPerfect Workstation

DIR 80013928, Ver. F

52 / 56

Assign an image to the group policy

1. Go to Group Policy Management.
2. Select Group Policy objects.
3. Edit the GPO you just created (Install CPWS) by right clicking the Group Policy and selecting Edit.

The Group Policy Object Editor window appears.

4. Select User Configuration > Software Settings > Software installation.
5. Right click and select New/Package.

6. Select the MSI package and browse to the network location where you copied the CPWS

installation image.
Note:

You must select the “CPWS Remote Setup.msi” package from the network location rather
than the drive letter because the network path is accessible from the client PC whereas the
drive letter may not be accessible.