Welch Allyn Cardioperfect Workstation, Software Version 1.6.5 - Installation Guide - Manual (Page 16)

CardioPerfect Workstation
DIR 80013928, Ver. F 16 / 56
5. Reinstall USB drivers
To reinstall the USB drivers:
Caution: Connect USB devices only after the drivers are manually reinstalled.
1. Close all running programs.
2. Insert the CardioPerfect Workstation disc. The installer menu appears. (If this menu does not appear,
explore the disc, and run installer.exe.)
3. Select CardioPerfect Device Drivers.
4. Select the drivers you want to install:

CardioPerfect PRO-Link USB drivers

USB Spirometer drivers
Note: If you have older CardioPerfect MD or Portable ECG hardware, see Appendix A,
“Installing legacy Unilink USB drivers” on page 44.
5. Follow the instructions on the screen.