Welch Allyn Cardioperfect Workstation, Software Version 1.6.5 - Installation Guide - Manual (Page 12)

CardioPerfect Workstation
DIR 80013928, Ver. F 12 / 56
3. Install CPWS software
Installing CPWS software also copies selected device drivers (for the ECG recorder and spirometer) to the
hard drive.
Caution: Connect USB devices only after the software is installed. Otherwise, drivers must
be installed manually.
1. Make sure that you have administrator rights.
2. Close all running programs. Insert the CardioPerfect Workstation disc. The installer menu appears. (If
this menu does not appear, explore the disc, and run installer.exe.)
3. Click Install CardioPerfect Workstation. The installation wizard runs.
4. At the Welcome screen click Next.
5. Click Accept to accept the software license agreement.
6. Enter your registration information and click Next. (You can find the serial number and release code
on the disc case. Skip the leading 0s when entering the serial number.)