Welch Allyn Cardioperfect Workstation, Software Version 1.6.5 - Installation Guide - Manual (Page 21)

CardioPerfect Workstation
DIR 80013928, Ver. F 21 / 56
To configure Welch Allyn CardioPerfect Workstation for use with the
recorder:
1. Start Welch Allyn CardioPerfect Workstation.
2. In the File menu, click Settings and click Ambulatory blood pressure.
3. Click the Advanced tab.
4. Select device.
5. Set the COM-port number to the number of the serial port to which the ABP6100 recorder is
connected.
6. Click OK to save the settings.