Welch Allyn CP 50 Plus 12-lead resting electrocardiograph - User Manual User Manual
Welch Allyn Equipment
This manual is related to the following products:
Table of contents
Document Outline
- Contents
- Introduction
- Setup
- Connecting the patient cable
- Loading the thermal paper
- Powering the electrocardiograph
- About the menu
- Viewing or changing the settings
- Viewing the device information
- Verifying proper operation
- Connecting to an external USB printer (optional - available with CP 50 Plus only)
- Connecting to a CardioPerfect workstation (optional, available with CP 50 Plus only)
- ECG tests
- Administrative tasks
- Turning the security option on or off (optional - available with CP 50 Plus only)
- Managing the user list (optional - available with CP 50 Plus only)
- Turning the audit trail on or off (optional - available with CP 50 Plus only)
- Managing the worklist (optional - available with CP 50 Plus only)
- Managing the test directory
- Maintenance
- Troubleshooting
- Lead-quality problems
- System problems
- The electrocardiograph won't turn on when it is plugged in
- The electrocardiograph won't turn on when it is unplugged
- The electrocardiograph shuts down during printing
- The electrocardiograph prints fewer than 10 reports on a full battery charge
- The electrocardiograph does not respond when you press buttons or touch the screen
- Limited warranty
- Service policy
- Specifications
- Guidance and manufacturer’s declarations