Welch Allyn CP 100 12-Lead Resting Electrocardiograph - User Manual - Manual (Page 55)

Directions for Use Chapter 5 Performing ECG Tests 51
Figure 34. “Auto ECG Post-Print” Screen
5. Select the desired item.
Item Effect
Exit The Ready screen appears if all leads are connected to the patient.
Print Copy A copy of the test prints.
To learn how to print multiple copies of all tests automatically, see “Reviewing the
Interpretation and Copy Settings for Auto Reports” on page 36.
Repeat Test The following screen appears.
Figure 35. “Auto ECG Repeat Test” Screen
1. (Optional) Adjust the waveforms.
See “Adjusting the ECG Waveforms” on page 55.
2. Choose Print ECG.
A new report prints.
Export Test Sends the test to the memory card. An SD memory card or removable USB storage device
must be in place.
Doe, Jane 9:17AM Oct 16 08
Auto ECG : Post-Print
1. Exit
2. Print Copy
3. Repeat Test
4. Export Test
Doe, Jane 9:17AM Oct 16 08
Auto ECG Repeat Test
1. Adjust Gain
2. Adjust Baseline Filter
3. Adjust Muscle Filter
4. Print ECG
10 mm/mV
ON
ON