Welch Allyn CP 100 12-Lead Resting Electrocardiograph - User Manual - Manual (Page 31)

Directions for Use Chapter 3 Reviewing the System Settings 27
Reviewing the Device Configuration Settings
1. Press the Menu key .
2. Choose System Settings > Device Configuration.
The following screen appears.
Figure 18. “Device Configuration” Screen
3. Change any desired settings.
Setting Description
Set Date/Time Current date and time.
Language List of languages available. Changes take effect when the next screen appears.
Date Format MM/DD/YY (month/day/year)
DD/MM/YY (day/month/year)
Time Format 24-hour or AM/PM.
Weight Unit Kilograms (kg) or pounds (lb).
Height Unit Centimeters (cm), inches (in), or feet and inches (ft, in).
Power-Save On or off. When on, the electrocardiograph turns itself off after several idle minutes.
Practice ID Name of the practice, clinic, or hospital. This ID prints on all ECG reports.
Device ID Electrocardiograph identification. Enter up to 20 characters. This ID prints on all ECG
reports.
Audio Beeper On or off. When on, beeps to indicate errors, such as incorrect input, improper external
connections, or a printer error. Beeps may also indicate a low battery.
Increase Contrast Each time you select this choice, the display contrast immediately increases until you
reach maximum contrast.
Decrease Contrast Each time you select this choice, the display contrast immediately decreases until you
reach minimum contrast.
Contact Information Your office. Enter up to 40 characters. This information will appear on the accessories
Help page.
Device Configuration
1 Set Date/Time
2 Language
3 Date Format
4 Time Format
5 Weight Unit
6 Height Unit
7 Power-Save
8 Practice ID
9:17AM Oct 16 08