Welch Allyn OAE Data Manager - User Manual - Manual (Page 38)

Transfer results from the screener to the data manager
1. Connect a computer to the screener by plugging the USB cable connector into an
available USB port on the computer and the Micro-USB cable connector into the port
at the base of the screener.
The screener displays the message, “Waiting for PC,” detects the connection to the
computer, and waits for an action or communication from the data manager.
2. If a connection is not detected, click Detect Com Port to establish the Com Port
connection.
3. Click the RESULTS icon to transfer test results.
4. When all data has been transferred, click OK.
5. Navigate to the Recent Results tab, and then click the "Unnamed” patient to view all
transferred tests.
6. On the Records section of the Home tab, click New Patient to add patient names
and demographic information for patients tested.
7. On the Records section of the Home tab, click Assign to Patients, and then drag all
unnamed test results on the left side of the window to the appropriate patient name
on the right side of the window.
8. Click OK.
Review and print patient tests
1. On the Patients tab, select a patient and review all tests.
2. On the Home tab in the Results section, add notes to a specific test. The notes
appear in the printed report.
3. Select the tests in the list to be printed, and then on the Print section of the Home
tab, click Print.
The Print Preview tab appears.
4. Click Quick Print to print one copy of the report.
5. See the "Home tab Print section" of this Directions for use for more information on
printing options.
34 Typical use case: Collect, transfer, and assign results to a patient record Welch Allyn ® OAE Data Manager