Welch Allyn OAE Data Manager - User Manual - Manual (Page 36)

2. On the data manager, click Results to transfer the test data from the screener to the
database.
3. In the Results section of the data manager, click Notes to add notes to a specific
test.
The notes appear in the printed report.
Print results
1. Select the patient name in the Patients tab.
The patient test results appear in the window.
2. On the Home tab in the Print section click Print.
The Print Preview tab appears; the test results report appears in the window.
3. Review the report. If the data is what you want, perform one of these options:
• Click Quick Print to print to your default printer
• Click Print to select a printer.
• Click Print to select multiple copies.
See "Select a printer" and "Print multiple copies" for more information.
Transfer results from the screener to the data manager
1. Connect a computer to the screener by plugging the USB cable connector into an
available USB port on the computer and the Micro-USB cable connector into the port
at the base of the screener.
The screener displays the message, “Waiting for PC,” detects the connection to the
computer, and waits for an action or communication from the data manager.
2. If a connection is not detected, click Detect Com Port to establish the Com Port
connection.
3. Click the RESULTS icon to transfer test results.
4. When all data has been transferred, click OK.
5. Navigate to the Recent Results tab, and then click the "Unnamed” patient to view all
transferred tests.
6. On the Records section of the Home tab, click New Patient to add patient names
and demographic information for patients tested.
7. On the Records section of the Home tab, click Assign to Patients, and then drag all
unnamed test results on the left side of the window to the appropriate patient name
on the right side of the window.
8. Click OK.
32 Typical use case: Transfer patient names to screener and data to the data manager Welch Allyn ® OAE Data Manager