Welch Allyn OAE Data Manager - User Manual - Manual (Page 15)

6. On the Records section of the Home tab, click New Patient to add patient names
and demographic information for patients tested.
7. On the Records section of the Home tab, click Assign to Patients, and then drag all
unnamed test results on the left side of the window to the appropriate patient name
on the right side of the window.
8. Click OK.
Use Bluetooth to transfer results from the screener to a computer
1. Connect a computer to the screener by pairing the screener with the computer.
The screener displays the message, “Waiting for PC,” detects the connection to the
computer, and waits for an action or communication from the data manager.
2. If a connection is not detected, click Detect Com Port to establish the Com Port
connection.
3. Click the RESULTS icon on the data manager, and then immediately press the UP
control panel button on the screener to display the Bluetooth menu for data transfer.
4. Press the LEFT or RIGHT control panel button on the screener to transfer data.
5. When all data has been transferred, click OK.
6. Navigate to the Recent Results tab, and then click the "Unnamed” patient to view
all transferred tests.
7. On the Records section of the Home tab, click New Patient to add patient names
and demographic information for patients tested.
8. On the Records section of the Home tab, click Assign to Patients, and then drag all
unnamed test results on the left side of the window to the appropriate patient name
on the right side of the window.
9. Click OK.
Transfer patient names to the screener
1. Power on the screener.
2. Connect the screener to a computer using a Bluetooth connection or the micro-USB
connector.
The data manager defaults to the previously used Com Port number and
automatically detects the screener on that port. The message, “Waiting on
computer” appears on the screen. See “Detect Com Port” if this is the first time the
instrument is connected.
3. On the Home tab, click Names.
The Store Names to Instrument window appears.
4. If necessary, click Clear List to clear previously transferred patient names, and then
immediately press the UP control panel button on the screener to display the
Bluetooth menu for data transfer.
5. Press the LEFT or RIGHT control panel button on the screener to transfer data.
6. If desired, click Clear Instrument to delete all patient names and test records on the
screener.
The patient names will be displayed on the device in alphabetical order.
Directions for use Understand the data manager interface 11