Welch Allyn OAE Data Manager - User Manual - Manual (Page 25)

the default setting for the second field is the First Name. You can select alternatives for
the last name and first name using the Patient Identifiers section.
Set patient identifiers
1. On the Settings and Audit tab, click Patient Identifiers.
The Set Patient Identifiers screen appears.
2. In the First Identifier section, select the field you wish to see in the screener. The
First Identifier must be a unique identifier for the patient.
3. In the Second Identifier box, select the field you wish to see in the screener.
4. Click OK.
The screener uses two fields to identify the patient. Both fields are visible on the
screener during the scrolling function to select a patient. After a patient is selected by
pressing the top control panel button, only the first field is visible for identification
purposes when testing.
Use the Audit functions
The Audit section includes two items:
• Ear Changes
• Test Changes
1. On the Settings and Audit tab in the Audit section, click Ear Changes to review test
records that had the Test Ear changed.
2. On the Settings and Audit tab in the Audit section, click Test Changes to review
patient-specific test results that have been re-assigned from one patient name to
another.
Directions for use Understand the data manager interface 21