Welch Allyn OAE Data Manager - User Manual - Manual (Page 11)

Install from the CD
1. Insert the CD into the computer’s CD drive.
2. Go to Windows Explorer > Computer: > CD Drive (X:) > setup.exe.
3. Double-click setup.exe, and then follow the directions.
Connect the screener
There are two options for connecting the screener to a computer:
•
From the screener to a computer using a USB connection.
• From the screener cradle to a computer using a USB connection.
• From the screener to a computer using a Bluetooth WiFI connection
The instructions in this Directions for use assume connections are made directly to the
screener using a USB connection. However, all functions also can be performed with the
screener in the cradle using a USB connection or a WiFi Bluetooth connection.
Connect the screener to a computer
Use a standard USB to micro-USB cable to connect the screener to a computer:
1. Power on the screener and ensure that the screener is charged.
2. Plug the micro-USB connector into the port on the bottom of the screener.
3. Plug the USB connector into a USB port on the computer.
4. Power on the computer, and then launch the data manager.
The message, “Waiting on computer” appears on the screener.
5. Begin data or name transfers.
Connect the screener cradle to a computer
Use a standard USB to micro-USB cable to connect the screener cradle to a computer:
1. Power on the screener and ensure that the screener is charged.
2. Plug the micro-USB connector into the port on the bottom of the screener cradle.
The cradle does not need to be connected to a mains outlet for data transfer.
3. Plug the USB connector into a USB port on the computer.
4. Place the screener in the cradle.
5. Power on the computer, and then launch the data manager.
The message, “Waiting on computer” appears on the screener.
6. Begin data or name transfers.
Connect the screener to a computer using Bluetooth ®
You can only pair one device with the screener at any given time.
1. Power on the screener and ensure that the screener is charged.
2. Power on the computer, and then launch the data manager.
Directions for use Setup 7