beautypg.com

Standard calibration (continued), Step operator action displayed message comment, Observe the display – Rice Lake Datamax-ONeil M-Class User Manual

Page 79: Or, for reflective media, Or, for continuous media, The calibration was successful

background image

M-Class

71

Standard Calibration (continued)

Step

Operator Action

Displayed Message

Comment

9

Observe the display.









!

HBQ!NPEF!

DBMJCSBUJPO!DPNQMFUF!

!

!

Or, for reflective media:

!

SFGMFDUJWF!NPEF!!

DBMJCSBUJPO!DPNQMFUF!

!

!

Or, for continuous media:

!!

DPOUJOVPVT!NPEF!!

DBMJCSBUJPO!DPNQMFUF!

The calibration was successful.

See note below if another message was displayed.





10

Exit upon successful calibration:
Back out of the menu tree by
repeatedly pressing the

Key.

If using gap or reflective media,
press and hold the

Key.


The printer will begin advancing
media; allow at least one label
gap (or mark) to advance under
the sensor.

!

UIV!22;42B!36NBS3115!!

SFBEZ!

!

The printer is now ready to begin printing.

If this calibration was unsuccessful, go to Section
5.4.3.

Note: A ‘Warning Low Backing’ message indicates that the calibration was successful with notched media or media on a

transparent liner; see Section 7.1 for details on this and other possible messages.

See also other documents in the category Rice Lake Scales: