Rice Lake Datamax-ONeil M-Class - Manual (Page 64)

56 M-Class
5.1.6 Communications
SERIAL PORT A ♦ Controls the communications settings for Serial Port A.
BAUD RATE
Determines the serial communication rate.
38400 38400 bits per second
28800 28800 bits per second
19200 19200 bits per second
9600 9600 bits per second
4800 4800 bits per second
2400 2400 bits per second
1200 1200 bits per second
PROTOCOL Sets the data flow control (handshaking) method.
BOTH Uses both handshaking methods.
SOFTWARE XON/XOFF
HARDWARE CTS/DTR
NONE No flow control is used.
PARITY
Sets Word parity
NONE No parity
ODD Odd parity
EVEN Even parity
DATA BITS
Sets Word length
7 Seven bit Word length
8 Eight bit Word length
STOP BITS
Sets the number of stop bits
1 One stop bit
2 Two stop bits
PARALLEL PORT A
♦
Controls the communications settings for Parallel Port A.
PORT DIRECTION Determines if data is sent from the printer to the host via the parallel port.
UNI-DIRECTIONAL One-way printer communication.
BI-DIRECTIONAL Enables IEEE 1284 back-channel operation.